Glasses loosen for many different reasons. Most people put on and remove their glasses several times each day. The back and forth movements of the glasses’ arms increase the likelihood that they’ll loosen.
This article will discuss different ways to adjust your glasses at home.
How to Adjust Your Glasses at Home
It’s almost always possible to adjust your glasses at home. Unless they break and need repair, there are several things you can do to fix a loose pair of eyeglasses.
How to Tighten Glasses
Most pairs of eyeglasses have a screw located at the temple hinge on both sides. Check these screws periodically so you can tighten them before they fall out. To tighten glasses, you should:
- Get an optometric screwdriver. You can also use a small screwdriver if it fits into the screw top.
- Turn the screw clockwise until there is resistance. This moves the frame inward toward your head.
- Make sure you don’t over-tighten because it can strip the screw or snap the frames.
How to Adjust Eyeglasses
Sometimes glasses need other adjustments. Often the arms need adjustment, so they sit better over your ears. This is usually the case if your glasses dig into your ears or the sides of your head.
You can manually bend eyeglasses by:
- Twisting the earpieces inward toward your head. This works best with wireframes.
- If you’re adjusting plastic frame glasses, make the plastic pliable by warming it up in hot or warm water before bending it.
How to Adjust Glasses Arms
If the adjustment is needed in the glasses arms, you can maneuver them to make them fit better. Chances are if you wear glasses, they’ll feel tilted or crooked at some point.
If your glasses lay flat on a table but feel uncomfortable, you’ll need to adjust the glasses’ arms to accommodate your uneven ears. Eyewear should always suit your face shape, even if that means they are crooked.
The way you choose to level the temple arms is based on the type of glasses you have.
- Wireframes bend easily. You can bend them with your fingers or use a small pair of pliers to gently adjust the arms.
- Plastic frames need to be warmed before they can bend. You can warm the glasses in hot water for about 30 seconds or with a hairdryer, but be careful not to overheat.
- Once warm enough, you can slowly move the plastic up or down into the proper position.
How to Adjust Metal Frame Glasses
Traditional metal frames are the easiest style of glasses to adjust. To make adjustments to metal frame glasses, you’ll want to:
- Hold the frame of your glasses with your non-dominant hand.
- Use your other hand to grab the piece that needs adjusting. If you’re using pliers, use your non-dominant hand to grip the pliers and pinch the part needing adjustment.
- Rotate your hand or the pliers until you’ve made the adjustment.
Always make adjustments a little bit at a time, stop, try on your glasses, and re-adjust as needed.
How to Adjust Plastic Glasses Bridge
Sometimes the nose bridge of your glasses needs adjusting because they don’t sit comfortably on your nose. If this is the case, you’ll need to adjust the nose pads on either side of the bridge.
- If your glasses sit high on your face, move the nose pieces or pads further apart.
- If they sit too low, pinch the pads with your fingers so they’re closer together.
- Do your best to move each pad equally so your glasses remain symmetrical.
How to Adjust Plastic Frame Glasses
Adjusting plastic frame glasses is more difficult than metal frames, but it’s still possible to do this at home with an additional step.
To adjust plastic frames:
- Before you begin the adjustment, you’ll need to warm your glasses using hot water or a hairdryer for about 30 seconds to two minutes.
- Once warm and pliable, gently bend your glasses as needed.
- Wait until they cool and try them on.
- If additional adjustments are needed, reheat them and readjust.
You should never try to bend plastic glasses without heating them first because the plastic is brittle and will snap. If you have doubts that warming the plastic won’t be effective, take your glasses to an optician for adjustments.
Where to Buy Glasses + Contacts
Best Overall: Warby Parker
Fastest Delivery: EyeBuyDirect
Also Great: Liingo
Best Place to Buy Contacts: Discount Contacts
What to Do if Your Glasses Squeeze Your Temples
If your glasses squeeze your temples, you should loosen them. It’s common to experience headaches and discomfort when your glasses squeeze too tight.
If you need to bend the glasses part, you should:
- Use your non-dominant hand to hold your glasses
- Use your other hand to push the corner of the frames gently apart.
- Push on the corner area where the hinge and lens meet
- Once you do this on one side, repeat on the other side until you reach a comfortable width for your glasses.
Remember that you only want to do this with traditional wire or plastic glasses. Not all plastic-rimmed glasses can handle the adjustment, even after warming them. You should never adjust rimless and semi-rimless glasses at home.
When to Take Your Glasses to a Professional
Some frame materials can be adjusted at home, while others require professional attention. This is the case for glasses made from:
- Aluminum alloy
- Memory plastic
- Titanium or memory titanium
The more durable your frames, the less likely you are to have success making adjustments at home. Small adjustments work best. Leave major adjustments to the professionals.
If the problem is that the frame size is wrong, you’ll need to invest in new glasses. There’s only so much you can do to make glasses fit your face better.
Summary
Many glasses adjustments can be done at home. However, adjustments shouldn’t replace regular visits to an optometrist. Proper eye care includes routine visits to an eye doctor for exams. If it’s been awhile since you’ve had an exam and your glasses need adjusting, it’s worth waiting for a professional adjustment.
In this article
Best Places to Buy Glasses
